This photo shows the stem being fitted to the front end of the keel and before the apron is fitted onto the inside edge of the stem and on top of the front end of the keel.
The keel and stem now back upright and before the apron is fitted.
This photo shows the apron now fitted
This photo is a side on view of the front of the keel and stem/apron now fixed in place and the keel rebate being shaped to line up with the stem rebate.
This photo shows the first two mould stations being fitted to the keel.
This photo is a view from the stern end of the boat showing the shape of the boat.
This photo shows all the mould stations in place ready to start building the hull of the new dinghy.