Garboard plank and fitting the transom

This photo shows the stern knee getting fitted ready for the transon to be fixed to it.

 This photo shows the transom before it is cut to size,but after it is thickness to size.

 This photo shows the transom now being fixed to the stern knee.

 This photo shows the start of fitting the garboard plank to the stem

 This photo shows the starboard garboard plank being steamed into place.

This photo shows the two garboard planks in place, the port side one being fitted to the stem while the starboard side one is collong off.

 This photo shows the port side one in the final fitting before cutting the rebate on it and then fixing in position with copper nails and bronze screws.

 This photo shows the boat starting to take shape.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s